You won’t be able to receive mail from a current mailbox Outlook error

Microsoft has updated the Office update process to check your current Outlook configuration and decide if you may be affected by some known bug. If you have Microsoft 365 or Microsoft Office installed on your Windows 11 or Windows x reckoner, you may encounter the error bulletin Stop you lot should wait to install Office, Y'all won't exist able to receive mail from a current mailbox when y'all try to upgrade to a newer version of Part. This post identifies the crusade as well provides the solutions to this effect.

When you encounter this issue, you'll receive the total mistake message along the following lines;

Stop, you should look to install Office
You won't be able to receive mail from a current mailbox.
Outlook requires admission to the Autodiscover service for your Substitution service. You lot may desire to contact your mailbox provider or system administrator near this event.

If y'all selectInstall anyway on the error prompt and upgrade to the newer version of Outlook software, and then you start Outlook, the following error bulletin prompt will be displayed:

Outlook cannot log on. Verify y'all are connected to the net and are using the proper server and mailbox proper name.

And if you proceed to click OK on the mistake prompt, the post-obit error message prompt will be displayed:

Cannot beginning Microsoft Outlook. Cannot open Outlook window. The set of folders cannot be opened.

Outlook may freeze at the splash screen for several minutes before these errors messages are displayed. In some cases, if you select Install anyhow on the mistake prompt and upgrade to Outlook 2022, when you try to connect to a primary, shared, or consul mailbox or folder, a prompt is displayed with the following mistake message:

The resource that you are trying to use is located on an unsupported version of Microsoft Exchange. Contact your e-mail administrator for assistance.

Or, when you try to open up a Public Binder, a prompt is displayed with the following error bulletin:

Cannot aggrandize the folder. The set up of folders cannot be opened. Network problems are preventing connectedness to Microsoft Exchange.

Yous will run into the error in view if the Office update procedure determines that the Autodiscover service is inaccessible. This problem may occur due to either of the following reasons:

• The previous version of Outlook was configured to connect to Exchange Server without Autodiscover. This was washed by manually specifying the server settings. In Outlook, the pick to manually configure an Exchange account is no longer available.
• Autodiscover was previously available but is no longer available.

You won't be able to receive mail from a current mailbox

If y'all're faced with this effect, y'all can try our recommended solutions beneath in no item order and see if that helps to prepare the You won't be able to receive mail from a current mailbox error that occurred on your device.

1. Run Microsoft Support and Recovery Assistant tool
2. Run Microsoft Remote Connectivity Analyzer
3. Manually create new Outlook profile
4. Ensure Commutation Autodiscover service is running correctly
5. Uninstall/Reinstall Office Outlook
6. Upgrade Exchange Server

Let'due south take a expect at the description of the process involved concerning each of the listed solutions.

1] Run Microsoft Support and Recovery Assistant tool

You can begin troubleshooting to fix the You won't be able to receive mail from a electric current mailbox Part upgrade error that occurred on your device past running the Microsoft Support and Recovery Banana tool.

The tool can help y'all with Part if:

• You become an error when you install Part
• Can't activate Office
• Want to uninstall Function
• Can't sign in to Skype for Business
• Tin can't become email on phone
• Trouble opening or signing in to Outlook on the spider web
• Can't install, connect, or enable Dynamics 365 for Outlook

If you want, you can use the command-line version of Microsoft SaRA tool on your Windows 11/ten computer.

2] Run Microsoft Remote Connectivity Analyzer

This solution requires you to run the Microsoft Remote Connectivity Analyzer – a tool that allows you to analyze, troubleshoot and prepare Function 365 apps & other Microsoft services. Amidst other tests, the tool will run Microsoft Office Outlook Connectivity Test for Outlook Autodiscover. This test goes through the steps that Outlook uses to obtain settings from the Autodiscover service.

3] Manually create new Outlook profile

This solution requires you lot to manually create a new Outlook profile. To do this, you can follow the instructions in the guide on how to fix Error 0x8004010F, Outlook data file cannot be accessed on your Windows 11/10 device.

4] Ensure Exchange Autodiscover service is running correctly

Autodiscover is an Exchange server service which enables auto configuration of email clients (such as Outlook) in order to work with your email server via your electronic mail address.

In social club for Outlook to employ the Autodiscover service, the service has to be running and attainable over your current network connection. Yous can test whether your Autodiscover service is working correctly in either of two ways as follows:

Using PowerShell

The Exam-OutlookWebServices cmdlet ships with your Commutation server installation and can be found at the following path:

          C:\Program Files\Microsoft\Exchange Server\v14\Scripts

Where v14 is your Commutation server version.

To decide the status of your Autodiscover service using PowerShell, do the following:

• Press Windows primal + X to open Power User Carte.
• Tap A on the keyboard to launch PowerShell (Windows Terminal) in admin/elevated mode.
• In the PowerShell console, type or re-create and paste in the command below and striking Enter.

Test-OutlookWebServices -identity: [email protected] –MailboxCredential (Get-Credential)

Provide a valid email address and password when prompted for credentials and make sure all items in the consequence display Success. Otherwise, your Exchange server configuration is wrong.

Using Outlook client

To make up one's mind the status of your Autodiscover service using using Outlook client, do the post-obit:

• Launch Outlook.
• Right-click on the Outlook icon the Taskbar Corner Overflow while holding down the CTRL key.
• Select Test Email AutoConfiguration on the context menu.
• In the window that appears. enter a set of valid credentials.
• Brand sure but the Use Autodiscover option is checked.
• Click the Examination button.
• Once the test completes, click the Log tab.
• On the Log tab, expect towards the finish for a line which should contain Autodiscover to [Commutation Server URL] Succeeded. If yous don't see such a line, so your Exchange server configuration is wrong.

v] Uninstall/Reinstall Role Outlook

This solution requires y'all to practise either of the following:

• Uninstall Outlook 2022 and then reinstall Outlook 2022 on your PC, if you upgraded to Office 2022 from a Microsoft 365 subscription.
• Uninstall Part 2022 and reinstall Office 2022 Home and Business, Role 2022 Professional person, or Outlook 2022 for Windows standalone if you previously had ane of these earlier versions of Function on your PC.

See our guide on how to reinstall earlier Office version after after upgrading to the next version.

6] Upgrade Exchange Server

This solution requires the Commutation Server upgraded to a newer version by your Isp (ISP) or visitor email server administrator. After the Exchange upgrade, yous tin reinstall Outlook 2022 for Windows eleven/ten.

Y'all can also avoid these errors assuming you have multiple Outlook e-mail accounts, and ane of the accounts that isn't your primary account is connected to an older Substitution server, y'all tin can remove the account from Outlook and then add/use the account to the Mail app or another email program on your system.

Hope you find this post helpful!

Related post: Fix Office Error Code 30010-4 during Installation or Upgrade

How practice I enable my electric current mailbox?

To detect attachments using Outlook's search box to search a specific folder, do the post-obit: Select that folder in the folder pane. At the meridian of the message list, you'll see a box that says Search Current Mailbox. Click to identify your cursor in that box, type hasattachments:aye, and then click Enter.

Why am I not receiving emails from outside my arrangement?

To receiving emails from outside your organisation, get to Role Admin Center > Admin > Admin centers > Exchange > Recipients > Mailboxes. Select and open your mailbox > Mailbox features > Message delivery restrictions. Uncheck the Require that all senders are authenticated option.

Source: https://www.thewindowsclub.com/you-wont-be-able-to-receive-mail-from-a-current-mailbox-outlook-error

Posted by: destefanothroureept.blogspot.com

Share this post